Metered amount of oil is pushed by Air in a tube, forms into streaks.
It is an innovative technology for high and low speed bearing application lubricating with air-oil. The main advantage of this system is cooling the bearing along with lubrication. The principle of Air-oil lubrication is a metered quantity of oil is pushed by the airflow, diffused in streaks and carried in the direction of airflow. Oil Streaks are carried all along the inner wall of the tube, which is generally smaller in diameter, connected to the lubrication point.
A correct length of tube with a sufficient oil dispensing cycle sequence, a continuous flow of oil can be achieved at the outlet. Oil shall remain at the friction surface and the air, which is free from oil, can escape into the open. This air flow will protect bearings from entry of outside contamination and a fresh effect is retained inside the bearings.
The pump system is equipped with an inductive sensor and switches, which will ensure the lubricant dispensing and can trigger alarm in case of an insolvency.
Benefits
- Prevent Premature bearing failure due to water ingress or foreign bodied into the it.
- Extended bearing life.
- Protect from overheating.
- Enhanced equipment performance
- Higher durability
- Reduction in Lubricant consumption
- Environmental benefits.
Applications
- Metal
- Machine tools
- Chains